Visualization server for mobile devices (iOS and Android) and Windows operating system Devices that can be visualised in the Gira Smart Home App: Switching, dimming, garage doors, door openers, blinds, awnings, skylights, roof domes (with and without positioning), floor heating/cooling (electric, hydronic with heating/cooling requirement notifications), radiators (electric, hydronic), status indicator for a binary state (on, off), status indicator for decimal states (actual temperature)
Group control (switching, dimming, blinds, shutters, wnings, skylights, roof domes), scenes, IP camera, Sonos audio control, Philips Hue, eNet SMART HOME
Up to 250 devices can be controlled per project using the Gira Smart Home App
Up to 250 timers, each with 10 switching times, can be set by the user in the app.
Connection of up to 20 IP cameras
Connection to Sonos with up to 8 Sonos rooms including assignment and selection of favourites
Connection to Philips Hue with up to 30 Hue devices or 5 Hue bridges
Occupied-home simulation with simulation start corresponding to the day
Intuitive app with a user interface that can be adapted by the user:
Individual favourites area.
Easy configuration of timers and scenes
Easy adaptation of functions and rooms (sorting, inscriptions, symbols, parameters, room and trade assignment)
More than 400 symbols are available for display customisation
Temperature display in the header (indoor and outdoor temperature)
NFC tag for calling up individual scenes
Automatic location detection via GPS for the astro function
Activate and enable remote access for other users
Enable remote maintenance for electricians
User management including management of access rights for individual users
PIN protection for system settings within the Gira Smart Home App
Administrator authorised to change the device password of the Gira One server via the Gira Smart Home App
Up to 50 scenes, each with 64 scene variants
Integrated diagnostic function:
Bus monitor to control devices and electrical loads
Telegram monitor with ring memory for storing up to 500,000 telegrams
Access to multiple profiles in the Gira Smart Home App (Gira One, Gira X1).
Simultaneous access to the Gira One server from 100 mobile devices
Up to 62 users can be created in user management
Start-up server for up to 200 Gira One devices
Integrated, secure remote access function for Gira Smart Home App
Integrated, secure remote maintenance function with Gira Project Assistant
The device password protects the Gira One server against unauthorised access
Based on the globally proven KNX Smart Home standard.
Encrypted TLS data transfer between the Gira Smart Home App and Gira One server and between the GPA and Gira One server prevents interception by third parties
Encrypted bus communication (KNX Data Secure) between Gira One devices and the Gira One server protects against unwanted access and manipulation of the Smart Home by third parties
Connection of an eNet SMART HOME server with a maximum of 100 eNet switching, dimming and shading devices
Known errors
Gira One server
Gira One server: on the device website, it is not possible to log in using "Insert password" or "Ctrl+V". After the password has been reset in the Gira Smart Home App, it is not possible to log in to the device website using "Insert" or "Ctrl+V”.
In rare cases, the Gira One Server is not found during start-up. If "Search for Devices” is started in the GPA area "Devices in Network", the Gira One server will be found and start-up can continue.
Gira Smart Home App
If remote access is activated for a number of users one after the other, this may result in an incorrect display. After remote access is activated, the "Manage remote access" overview may incorrectly indicate that remote access has been deactivated again for some of the remote accesses that were previously activated. The status is displayed correctly again after a period of time.
Display of temperature values in heating device and decimal status display. There is a difference of approx. 0.2K between the same temperature value in the heating device and decimal status display.
Gira QR Scan App
You cannot use the scanning function with a Samsung Galaxy S10. The camera image is very blurry and cannot be scanned with a Samsung Galaxy S10 SM-G973F/DS and Android 12
Poor focus quality with Samsung Galaxy S21 The QR Code Scan App does not focus properly with a Samsung Galaxy S21 5G and Android 13
The camera image does not always match the cut-out in the display on various iPhone products On iPhone 12 (iOS 16.1.2), iPhone 13 (iOS 16.3), and iPhone 14 (iOS 16.1.2), the cut-out in the display is not shown correctly and this can result in issues with the scanning process.
