DCS-IP data interface

The DCS-IP data interface connects the Gira 2-wire bus to the IP network. It can be used either as a pure configuration tool or to control convenience functions of the Gira door communication system and other systems (e.g. KNX system). The DCS-IP data interface allows for an easy start-up using Gira Project Assistant (GPA) even if the items to be installed are not yet available on-site. The transfer of data points to building automation is also enabled. Thus, for example, "Leaving Home" or "Coming Home" scenes can be initiated using Gira X1 for an incoming call at the door. The tried and tested pushbutton start-up can also still be used.

Online catalogue

Downloads

Training

Configurator

DCS-IP data interface – easy start-up of the door communication system

The new Gira DCS-IP data interface tool box makes it very easy for you to set parameters for a Gira door communication system together with the GPA from the comfort of your desk. All home stations can be put into operation in just a few steps – without having to traipse up and down the stairs. Further information can be found in the video.

Watch the video to see the benefits of the DCS-IP data interface

Special features and highlights

Easy start-up of the Gira door communication system via PC and Gira Project Assistant.
It is easy to make subsequent changes or additions to the system.
The device only remains in the system while programming is carried out (thus no direct cost increase for the overall system).
Protection against tampering through pairing with control device.

Diverse options

The configuration of the Gira door communication system can be carried out via GPA prior to installation and thus shorten the time needed for configuration. The DCS data interface is used for connection of the analogue 2-wire bus to IP. Additionally, the configuration data of existing systems can be read out. Combination with other product groups is also possible, e.g. door communication with logic module Gira L1 or Gira X1. The central control via IP enables the muting of individual home stations. The occupancy simulation makes it possible, for example, for lights to be switched on in the house if the doorbell is rung while you are not home. This simulates movement in the house.

Download

Operating instructions

DCS IP data interface

Operating instructions

Bestell-Nr 5500 000

PDF, 389,8 KB

Download

DCS IP data interface

Quick start guide

Bestell-Nr 5500 000

PDF, 1,0 MB

Download

Brochures

Gira door communication

Bestell-Nr 18123 90

PDF, 2,2 MB

Download

Software

Gira Projekt Assistent (GPA)

Configuration software for Gira One, Gira L1, Gira X1, Gira S1, Gira G1, DCS-IP data interface and Alarm Connect security system.

ZIP, 1067,2 MB

Download

DCS-IP data interface

Firmware file

Bestell-Nr 5500 000

ZIP, 28,1 MB

Download

The following files are not available in the language you have selected, but may be in other translations.

TKS Busadressen Finder

Die Software dient zum Auffinden von TKS-Busadressen für den Fall, dass die Adressen noch nicht auf dem Gerät zu finden sind.

Bestell-Nr 5500 000

ZIP, 65,2 MB

Download

Guides / system basics

Gira Door communication system

Basics, planning examples Door communication system Order no. 1736 90

PDF, 5,4 MB

Download

Technical data

Door communication DCS-IP data I/F

Power supply

2-wire bus:

DC 24 V ±2 V

Additional power supply:

DC 12 V to 26 V

Current consumption:

max. 5 mA

Connections

2-wire bus:

2 x plug terminal

Additional power supply:

2 x plug terminal

Optical display

Mode:

orange

Fct./Prog.:

green

IP communication:

Ethernet 10/100 BaseT (10/100 Mbit/s)

Ambient temperature:

-5 °C to +45 °C

Humidity:

93% rel. humidity

Protection class:

III (as per IEC 61140)

DCS-IP data interface

DCS-IP data interface – easy start-up of the door communication system

Special features and highlights

Diverse options

Download

Operating instructions

Brochures

Software

Guides / system basics

Technical data

Door communication DCS-IP data I/F

Contact us.